Разбор Samsung Galaxy S5 / Samsung Galaxy S5 teardown: Субтитры к видео
| Русский оригинал | Перевод на английский | |
|---|---|---|
Сожалеем, но текст оригинала доступен только зарегистрированным пользователям. |
Hello everyone, it's Ferra.ru and we've got zaykovsky 31.03.14 в 08:38 |
|
|
Samsung's flagship Android phone zaykovsky 31.03.14 в 08:39 |
||
|
Curious about what's inside? zaykovsky 31.03.14 в 08:39 |
||
|
The design is very zaykovsky 31.03.14 в 08:40 |
||
|
complicated and the phone zaykovsky 31.03.14 в 08:40 |
||
|
all over the contour apismenny 31.03.14 в 08:31 |
||
|
Let us remind you that the phone zaykovsky 31.03.14 в 08:42 |
||
|
water and dust resistant zaykovsky 31.03.14 в 08:42 |
||
|
That means you can put it into the water zaykovsky 31.03.14 в 08:48 |
||
|
for 30 mins maximum zaykovsky 31.03.14 в 08:48 |
||
|
Disassembly of this smartphone apismenny 31.03.14 в 08:33 |
||
|
so we recommend you zaykovsky 31.03.14 в 08:49 |
||
|
try not to do it a home. zaykovsky 31.03.14 в 08:49 |
||
|
It is better to leave it apismenny 31.03.14 в 09:08 |
||
|
First of all let's turn off the phone, zaykovsky 31.03.14 в 08:55 |
||
|
and pull out the battery. Kuuuzya 31.03.14 в 08:31 |
||
|
Battery has become thinner and longer zaykovsky 31.03.14 в 08:55 |
||
|
And the capacity has increased zaykovsky 31.03.14 в 08:56 |
||
|
to 2800 mAh. zaykovsky 31.03.14 в 08:56 |
||
|
Now we have to remove the screw zaykovsky 31.03.14 в 08:58 |
||
|
of the fingerprint sensor apismenny 31.03.14 в 09:09 |
||
|
and Home button wire. Kuuuzya 31.03.14 в 08:37 |
||
|
Next step. Remove two screws zaykovsky 31.03.14 в 09:01 |
||
|
which are holding the middle part of the case zaykovsky 31.03.14 в 09:01 |
||
|
and the bottom plate. zaykovsky 31.03.14 в 09:02 |
+1 | |
|
As we've done the preparatory job zaykovsky 31.03.14 в 09:03 |
||
|
it's time to move to the hardest part. zaykovsky 31.03.14 в 09:04 |
||
|
Unmount the screen. zaykovsky 31.03.14 в 09:04 |
||
|
We need to warm up front zaykovsky 31.03.14 в 09:05 |
||
|
panel of the phone to detach it. zaykovsky 31.03.14 в 09:07 |
||
|
Heat gun will help us to do so. zaykovsky 31.03.14 в 09:07 |
||
|
Set the temperature to 150* C. zaykovsky 31.03.14 в 09:08 |
||
|
Then warm up the phone zaykovsky 31.03.14 в 09:09 |
||
|
warm up phone Kuuuzya 31.03.14 в 08:51 |
||
|
Careful, don't burn it. zaykovsky 31.03.14 в 09:09 |
||
|
Now use thin plactic card zaykovsky 31.03.14 в 09:12 |
||
|
to take the screen off. zaykovsky 31.03.14 в 09:12 |
||
|
The screen is fixed by double sided tape which attaches screen to the body. zaykovsky 31.03.14 в 09:13 |
||
|
that holds the middle part of Kuuuzya 31.03.14 в 08:55 |
||
|
The tape is hard to remove at the first attempt. Sometimes zaykovsky 31.03.14 в 09:14 |
||
|
make it right the first time Kuuuzya 31.03.14 в 08:56 |
||
|
As the temperature goes down zaykovsky 31.03.14 в 09:15 |
||
|
the tape improves it's strength. zaykovsky 31.03.14 в 09:15 |
||
|
So maybe you will need to zaykovsky 31.03.14 в 09:15 |
||
|
warm up the phone again. Kuuuzya 31.03.14 в 09:00 |
||
|
After we detached the screen zaykovsky 31.03.14 в 09:16 |
||
|
from the tape, Kuuuzya 31.03.14 в 09:02 |
||
|
we can disconnect the screen's cable zaykovsky 31.03.14 в 09:17 |
||
|
with a special scalpel. zaykovsky 31.03.14 в 09:17 |
||
|
Don't forget to remove fingerprint sensor's wire zaykovsky 31.03.14 в 08:50 |
